New beginnings Microwave Steriliser Bags 6 pack

Active Ingredients

PET/RCPP laminated

Directions of Use

1. Wash and rinse item parts to be sterilised

2. Pour 60ml (2oz) of tap water into the bag. Without the appropriate amount of water, the parts could distort in shape

3. Place breast pump parts and bottles into the bag. Make sure all parts are dissassembeled and loose. Then seal the bag tightly - do not overload

4. Place steam bag in the centre of the turntable of the microwave. Make sure the steam bag is standing upright. Rotate the bag half way through if your microwave does not have a turntable. Microwave on high power using the chart below: 1.5min for 1100W+, 3 min for 800-1100w, 5 min for 500-750 w

5. Leave bag to cool for at least 3 min before removing it from your microwave

CAUTION: Be careful as steam & water will be very hot!

6. Use built in drain spout to pour remaining water before removing the sterilised parts. Rinse bag prior to next use 

• Be careful when removing the bag from the microwave as hot water and steam inside will be very hot
• Only sterilise parts deemed safe for microwave sterilisation
• Steam bag is intended only for plastics that are microwave safe
• Do not place steam bag on the metallic grill or dish, sterilising tubing may cause discolouration which will not affect its performance
• Heating for longer than the recommended time may cause distortion
• Follow the instructions for your microwave
• Do not use in conventional oven.